Motorola FD-1 - Manual (Page 7)

FD-1 English
Page 21
EMC declaration
This product is developed in accordance with the European standards
EN 55014 and EN 50082-1, tested corresponding to the EC - directive
89/336/EWG (EMVG of 09/11/1992, electromagnetic tolerance) and
meets legal requirements.
To guarantee the electromagnetic tolerance you must take the
following precautions:
§ Connect the transformer only to an approved mains socket installed
by an authorised electrician.
§ Make no changes to the original parts and accurately follow the
instructions, circuit diagram and PCB layout included with this manual.
§ Use only original spare parts if you have to repair the kit or the
ready-built module.
Information: Motorola I and Motorola II format
The digital driving data is differently encoded and transmitted in the
(old) Motorola I format and the (new) Motorola II format. The function
decoder FD-1 is designed to evaluate data in Motorola II format. When
using only Motorola II format the decoder FD-1 cannot be used. In
mixed Motorola I / II format the decoder can be used.
Operation overview
The function decoder FD-1 is designed for operation in Motorola I
format and switches the auxiliary functions F1 to F4. It does not react
on data sent in Motorola II format.
The decoder can be adjusted to one of 80 adress. It evaluates the
digital data sent by the central unit to its address and switches the
connected accessories (cab lighting, carriage lighting, smoke generator,
noise module). The setting of the decoder address is made by mounting
solder bridges.