Moxa Technologies NPort 5400 - Manual (Page 83)

NPort 5400 Series User’s Manual Configuring NPort Administrator
6-27
IP Location
When NPort 5400 is used in a dynamic IP environment, users must spend more time with IP
management tasks. NPort 5400 Series products help out by periodically reporting their IP address
to the IP location server, in case the dynamic IP has changed.
1. Configure NPort 5400 with Dynamic IP settings (DHCP, BOOTP, or DHCP/BOOTP). Assign
the remote Auto IP report server’s IP address and UDP port.
2. Select IP Location Report and click the right mouse button to select Settings.
3. Configure the Local Listen Port to be the same as the NPort 5400’s “Auto report to UDP port”
setting.