Martin Fireplaces DMX Controller 2518 - Manual (Page 15)

15
M ANUAL EXECUTION
To execute scenes manually, simply select a bank with the arrow buttons and select a
scene with the scene buttons. The new bank does not begin to execute until a scene
button has been pressed.
To execute the flash scene, press [Midi].
A
UTO TRIGGER EXECUTION
The auto trigger executes scenes at the rate that you set with the built-in timer. Unless
you are using Show Mode, described below, the current bank runs in a continuous
forward loop and may be switched manually or via MIDI at any time.
T O SET AUTO TRIGGER
1. Press [Auto]. Wait for the desired trigger
interval.
2. Press [Auto]. Execution starts.
3. To exit, press [Auto] again.
M USIC TRIGGER EXECUTION
The music trigger executes scenes to the beat of music using the built-in microphone.
As with auto trigger, the current bank runs in a continuous forward loop and may be
switched at any time.
T O SET MUSIC TRIGGER
1. Press [Music]. Execution starts.
2. To exit, press [Music] again.
Auto
Auto