Motorola Netopia 3342N - Manual (Page 116)

Administrator’s Handbook
116
Example
The following is a simple example of how you might configure some VLANs:
You want to configure a 3347NWG-VGx Gateway with two SSIDs (see “Multiple SSIDs” on page 59 for more
information) for two VLANs, allowing both access to the Internet. One SSID will be in the same VLAN as the
four por ts of the Ethernet Switch, so that those two networks can communicate. The second VLAN will be
for the other SSID. The second VLAN will also be denied access to the 3347NWG-VGx web inter face and tel-
net inter face. This setup might be useful if you have a doctor’s office or a coffee shop, and you want to
keep your customers separated from the rest of the network.
1. In the VLANs page, check the Enable checkbox, select VLAN #1 in the VLANs list, and
click the Edit button.
2.
Check the Enable checkbox, and in the VLAN Name box, enter the name you would like.
For example, call it Network A.
Since this VLAN will be for SSID1 and the Ethernet por ts, leave Admin Restricted unchecked. This will
give this VLAN access to the Gateway.
3. Click the Submit button.
4. In the Port Configuration for VLAN:1 page, you add the Port Interfaces you want associ-
ated with the VLAN.