Dhcp settings, Common commands – Motorola Netopia 3342N User Manual
Page 248
Administrator’s Handbook
248
DHCP Settings
As a Dynamic Host Control Protocol (DHCP) ser ver, your Motorola Netopia® Gateway can assign IP
addresses and provide configuration information to other devices on your network dynamically. A device that
acquires its IP address and other TCP/IP configuration settings from the Motorola Netopia® Gateway can
use the information for a fixed period of time (called the DHCP lease).
Common Commands
set dhcp option { off | server | relay-agent }
Enables or disables DHCP ser vices in the Motorola Netopia® Gateway. You must enable DHCP ser vices
before you can enter other DHCP settings for the Motorola Netopia® Gateway.
If you turn off DHCP ser vices and save the new configuration, the Motorola Netopia® Gateway clears its
DHCP settings.
set dhcp start-address
ip_address
If you selected
server
, specifies the first address in the DHCP address range. The Motorola Netopia®
Gateway can reser ve a sequence of up to 253 IP addresses within a subnet, beginning with the specified
address for dynamic assignment.
set dhcp end-address
ip_address
If you selected
server
, specifies the last address in the DHCP address range.
set dhcp lease-time
lease-time
If you selected
server
, specifies the default length for DHCP leases issued by the Motorola Netopia®
Gateway. Enter lease time in
dd:hh:mm:ss
(day/hour/minute/second) format.
set dhcp option-group
name
Specifies a name for one of up to eight DHCP Option Groups. Each Option Group can have a name of
between 1 and 15 characters. The name is used in the DHCP filterset syntax to choose what group of gen-
options is to be ser ved to a par ticular DHCP Client. See
“DHCP Generic Options” on page 249
.
Option Groups refer to gen-options; they do not contain them. Deleting a gen-option from an option group
does not delete the option. Adding a gen-option to an option-group does not preclude it from being added to
another option-group.
set dhcp default-option-group
name
Sets the option group specified by
name as the default.
set dhcp server-address
ip_address
If you selected
relay-agent
, specifies the IP address of the relay agent ser ver.