Wireless – Motorola Netopia 3342N User Manual
Page 53
53
Wireless
(supported models)
If your Gateway is a wireless model (such as a 3347W) you can enable or disable the wireless LAN (WLAN)
by clicking the
Wireless
link.
Wireless functionality is enabled by default.
If you uncheck the
Enable Wireless checkbox, the Wireless Options are disabled, and the Gateway will not
provide or broadcast any wireless LAN ser vices.
SSID (Network ID): The SSID is preset to a number that is unique to your unit. You can either leave it as is,
or change it by entering a freeform name of up to 32 characters, for example “Ed’s Wireless LAN”. On client
PCs’ software, this might also be called the Network Name. The SSID is used to identify this par ticular wire-
less LAN. Depending on their operating system or client wireless card, users must either:
•
select from a list of available wireless LANs that appear in a scanned list on their client
•
or, if you are in Closed System Mode (see
Enable Closed System Mode below), enter this name on
their clients in order to join this wireless LAN.
The pull-down menu for enabling
Privacy offers four settings: WPA-802.1x, WPA-PSK, WEP - Automatic,
and
Off - No Privacy. WEP-Manual is also available on the Advanced Configuration Options page.
☛
NOTE:
On the 2200-Series Gateways,
WEP-Manual privacy is enabled by default. Use the Motorola
Netopia® Installation Wizard on the accompanying Motorola Netopia® CD to generate WEP
keys for connecting wireless client computers.