Using the cooktop 10, Turning on and off 10, Using the cooktop turning on and off – Miele KM 320 User Manual

Page 10: Using the cooktop, Turning on and off

Advertising
background image

Turning on and off

The control knobs are used to turn the
burners on and to regulate the strength
of the flames.

ß Cooktop is turned off

& Highest flame

/ Lowest flame

Turning on

^ To turn on the burner, press the

control knob down and turn it
counterclockwise to the large flame
symbol. The ignitor will click and
ignite the gas.

^ When the flame appears, keep the

control knob pressed in for
8-10 seconds to allow the Ignition
Safety Control to reach operating
temperature and release it.

If the flame goes out, repeat the above
procedure, keeping the control knob
pressed in for a few extra seconds.

^ Adjust the knob to the desired

setting.

Since the outer portion of the flame is
much hotter than the center, the flame
should be set so that its tips do not
extend beyond the sides of the pan.
Flame tips which extend beyond the
sides of the pan are hazardous.

Turning off

^ Turn the knob clockwise to "

ß".

This stops the flow of gas and turns off
the burner.

The knob must only be turned left to
turn the appliance on and right to
turn it off.

If the knob is turned:
- on without pressing it down first,
- clockwise past the 12 o’clock
position, or
- counterclockwise past the smallest
flame symbol,
parts of the cooktop may be
damaged. The manufacturer cannot
be held responsible for these
damages.

Using the cooktop

10

Advertising