Safety feature 12, Using the cooktop during a power failure 12, Using the cooktop – Miele KM 320 User Manual
Page 12: Safety feature, Using the cooktop during a power failure
Safety feature
This gas cooktop incorporates an
Ignition Safety Control which stops the
supply of gas if the flame goes out.
^ To reignite the burners, turn the
control knob clockwise to "
ß", then
follow the procedures outlined in
"Turning on and off".
This safety feature is not operated by
electricity, it will be active even if the
appliance is in use during a power
failure.
Using the cooktop during a
power failure
If there is an interruption to the
electrical supply, the gas can be
ignited using a match.
^ Press down on the desired control
knob and turn it counterclockwise to
the large flame symbol.
^ While holding down the knob, light
the gas at the burner with a match.
^ When the flame appears, keep the
control knob pressed in for
8 - 10 seconds to allow the Ignition
Safety Control to reach operating
temperature.
Using the cooktop
12