Midland Radio SYN-TECH III P25 - Manual (Page 47)

Syn-Tech III P25 Portable Radio
OPERATION MANUAL
680-090-2040
Version 6.0
http://www.midlandradio.com
39
4.2.3 Receiving Digital Individual Calls
A digital individual call is addressed to
a single unit ID rather than a talk
group. When this radio receives an
individual call from another radio it will
automatically switch to individual call
mode. The radio will use the received
source ID as the destination ID in
individual call replies.
If no signal is received and PTT is not pressed for ten seconds, individual
call mode will time out.
Press PTT
to reply to
individual
call
Individual
call time out
(after ten
seconds)
Figure 4.35 – Receiving individual call