Midland Radio SYN-TECH III P25 - Manual (Page 51)

Syn-Tech III P25 Portable Radio
OPERATION MANUAL
680-090-2040
Version 6.0
http://www.midlandradio.com
43
4.2.7 Receiving a Digital Call Alert
A call alert is normally used as a low priority
request to return the call when it’s more
convenient. When a call alert is received the
radio will display the unit ID of the initiator.
4.2.8 Transmitting a Digital Call Alert
Press the Call Alert key (default:
pound key) until “CALL
ALERT:” is displayed. Enter the
destination unit ID or press the left
soft key for INDEX. Press the left
soft key (SEND) to send the call
alert. The radio will send up to four
call alert requests.
Call alert
transmissions may
be disabled in radio
programming.
Figure 4.40 – Receiving a call alert
Press Call
Alert key
Enter unit ID
or press
INDEX
Press SEND
Figure 4.41 – Initiating a call alert request
If unit ID is does
not answer