Recording, English, Remarks about recording – Marantz CDR631 User Manual

Page 15: Recording modes

Advertising
background image

9

ENGLISH

RECORDING

Remarks about recording

If the disc is a CD-RW and is already finalized you must
unfinalize it first to record onto it.

The recording procedure is the same for CD-Rs and CD-
RWs.

If the disc already contains recordings, the CD-Recorder will
automatically search for the end of the last track, so that re-
cording can start from there.

There must be at least 7 seconds of recording time left
on the disc
, otherwise you will not be able to enter record
standby mode.

will light up.

A maximum of 99 tracks can be recorded on a disc. Minimum
allowable track length is 4 seconds.

Recordings from DAT or DCC players will not always stop
automatically.

SRC (Sample Rate Conversion)
This CD-Recorder can perform Sample Rate Conversion on
the incoming signal, it is capable of handling sources ranging
from 11 kHz up to 56 kHz.
If no 44.1 kHz (± 100 PPM) source is connected, this CD-
Recorder will automatically switch on the SRC.

If the source is 44.1kHz (± 100PPM) the SRC will be auto-
matically bypassed.

See page 19 for information about the recording menu set-
tings.

Important:

If you want to play a recorded CD-R disc on any regular CD
player, it must first be finalized. (See FINALIZING/
UNFINALIZING.)

Finalized CD-RW discs play only on CD-RW compatible CD
players.

See page 1 for more information on CD-R and CD-RW discs
and Conpact Disc Care.

Warning:

Recording is no longer possible after finalizing a CD-R
disc!

Recording modes

The CDR631 offers several recording modes.

-

- synchronised recording of a whole disc

based on the tracks from a source CD, DAT, cassette or
other source.

-

- synchronised recording of a single

track based on a single track from a source CD, DAT, cas-
sette or other source.

-

- manually controlled recording from an ex-

ternal source.

-

- same as the RECORD DISC function except

that the CDR631 will automatically finalize the recorded CD
once recording is finsihed.

Some remarks on recording:

-

When Auto track is on (default setting), track numbers will
automatically be increased during recording
.

-

If a finalized CD-R disc is inserted in the CD-Recorder,

will be displayed. Recording is not

possible.

-

If a finalized CD-RW disc is inserted in the CD-Recorder,

and

will be displayed

when the

REC MODE

(26) is pressed. If the

REC LEVEL/

SELECT

(19) knob is pressed, the disc will be unfinalized.

-

If the recording source is a special disc such as HDCD or
DTS, you have to

set the sampling frequency to 44.1kHz.

use a digital connection.

set the digital rec-volume of the CDR631 to 0 dB.

-

When you copy the tracks from a DAT recorded by different
sampling frequencies, noise might be recorded in the disc
when the sampling rate changes.

The numbers between parentheses refer to the fold-out.

CDR631(U)_Eng_P01-11.p65

8/4/00, 9:29 AM

9

Advertising