Marantz CDR631 - Manual (Page 29)

23
ENGLISH
DISPLAY OTHER INFORMATIONS
Menu messages
................... when attempting to edit text on a
disc which has no tracks
................... when entering Text Edit mode
.................... when editing or erasing an artist
name
...................... when editing or erasing a title
.............. when editing or erasing an artist
name per track
................. when editing or erasing a title per
track
................. when entering Text Erase mode
...................... when entering All Text mode
...................... when confirmation for erasing has
to be given with ENTER key
........... when confirmation for erasing all
tracks have to be given with EN-
TER key
........... when waiting for confirmation when
erasing a disc
................... when selecting text review per
unfinalized disc in memory
(page 19)
........... when REVIEW is selected while no
text is in memory
............... when selecting auto track incre-
ment ON or OFF
...................................... Auto Track increment on
(page 19, 20)
.................................... Auto Track increment off
(page 19, 20)
.............. when selecting BALANCE (page 20)
......................... no text stored for disc
Fixing problems
If you think your CD-Recorder is defective, it is wise to read this
list first. Maybe you forgot a simple step.
Warning!
Under no circumstances should you attempt to repair the
CD-recorder yourself as this will invalidate the guarantee.
No power
• ensure that the POWER ON/OFF (1) button is on: the
CD-Recorder may be in standby mode, press any button
to activate it
• ensure that the power cord is plugged in correctly
• switch the recorder OFF and then immediately back ON
Auto track does not work
• check if auto track is ON
• check if there are 2.7 seconds silence in between the
tracks (analog recording only)
• check that the digital source conforms to the SPDIF (or
IEC-958-II) standard
• source is a DVD video disc (DVD video discs do not con-
tain track information)
• make sure AES/EBU or analog source meet track mark-
ing criteria on page 19
No sound
• check the audio connections
• if using a amplifier or receiever, check that a signal is
present using headphones or try a different amplification
system
Amplified Sound is distorted
• check that the CD-Recorder analog output is not con-
nected to a PHONE input.
• check that the disc is not defective by trying another disc
Play will not start
• ensure that the label of the CD is facing up
• clean the disc
• check that the disc is not defective by trying another disc
Remote control does not work
• set the remote control selector to ‘INTERNAL’ on the
back panel
• point the remote control directly at the CD-Recorder
• check the batteries and replace if necessary
• select the right source first (CDR)
Will not record
• clean the disc
• check if CD-R(W) is an unfinalized disc
• check that the disc is recordable and replace if necessary
• the disc is not an audio disc ( )
• wrong input source chosen.
• text memory full ( / ).
Erase text for other disc(s) or finalize other disc(s) to
obtain memory space.
• check that the disc is not defective by trying another disc
The numbers between parentheses refer to the fold-out.
CDR631(U)_Eng_P12-23.p65 8/4/00, 9:39 AM 23