Marvel Industries 6CiM - Manual (Page 3)

FULL OVERLAY PANEL INSTALLATION INSTRUCTIONS
STEP 3: SELECTING AND PREPARING THE OVERLAY PANEL
OPTIONAL LOCK AND KEY
The optional lock and key helps protect your contents from tampering or misuse. The lock and key kit contains a lock cylin-
der, catch bracket, keys, and an installation nut. Some assembly is required as the lock and key is installed on the front of
the wood frame. See Figures 2 and 3 above for lock and key installation dimensions.
For a 3.5 inch Toe Kick
(Covers the Entire Door Extrusion)
Optional for a 4 inch Toe Kick
(To Match Existing Cabinetry
Toe Kick Height)
30.31
29.81
Mounting
Surface
(Non-Face) Side
Mounting
Surface
(Non-Face) Side
Mounting Surface
(Non-Face) Side Mounting Surface
(Non-Face) Side
Mounting Surface
(Non-Face) Side Mounting Surface
(Non-Face) Side
0.25 dia x 3/8 Deep Hinge Screw Clearance Hole.
Locate and drill using drill hinge hole after the door
has been aligned to the unit and when the wood is
positioned on the door.
0.25 dia x 3/8 Deep Hinge Screw Clearance Hole.
Locate and drill using drill hinge hole after the door
has been aligned to the unit and when the wood is
positioned on the door.
Pre-Drilled Pilot Holes
10 Places
See Step 1,
for Drill Size
Top Surface
0.25 dia x 3/8 Deep Hinge Screw Clearance
Hole. Locate and drill using drill hinge hole
after the door has been aligned to the unit
and when the wood is positioned on the door. 0.25 dia x 3/8 Deep Hinge Screw Clearance
Hole. Locate and drill using drill hinge hole
after the door has been aligned to the unit
and when the wood is positioned on the door.
0.63 Min.
0.75 Max. 0.63 Min.
0.75 Max.
23.75 23.75
17.94
5.81 5.81
0.73
Top &
Bottom
0.73
0.81
Both Sides
0.81
Both Sides
5.73 5.73
15.16 15.16
24.58 24.58
Figure 2 Figure 3
Pre-Drilled Pilot Holes
10 Places
See Step 1,
for Drill Size
17.94
2