Millennium Enterprises Integrated Modeling Amplifier - Manual (Page 27)

Selecting A Preset
When you first turn on your Millennium, you are in Preset mode, and the display will appear something like:
To select a preset, do the following:
1. Make sure Preset mode is selected (the <Preset> button will be brightly lit). If the <Preset> button is dim, press it once to return to
preset mode.
2. Use the <Preset> button to select the preset bank (factory or user). Successive presses of the <Preset> button toggle between the
factory and user bank of presets.
3. Using the <Preset/Effect> wheel, scroll to the preset you want to use.
Using the Tuner
The Tuner of the Millennium can be accessed two ways. Either in page l of the Utility menu or by using the optional Johnson Amplification
J-12 foot controller. The following explains both modes of operation.
Utility Menu Tuner Mode
1. Press the <Utility> button once. The display reads:
2. Now turn the <4> knob to turn the tuner on. The display will now appear something like this:
?? TUNER A=440 Output 127
FACTORY USER
% %kHz
msdB 3 4
CHANGED LINK CHANGED LINK
100
CHANGED LINK
WAH TUBE EQ L/R OUTS
L/R OUTS
DIGITAL
CLIP
# b
GATE
MIDI
SOLO
EQ DIST
Stereo Cab:4x12 Tuner
127
FACTORY USER
2 2 1 2 %kHz
msdB 3 4
CHANGED LINK CHANGED LINK
Off
CHANGED LINK
PAGE
1
OF
16
WAH TUBE EQ L/R OUTS
L/R OUTS
DIGITAL
CLIP
GATE
MIDI
BANK SOLO
EQ DIST
2
Clean Comp Delay
2
USER
%kHz
ms
dB
0 1
CHANGED LINK
%kHz
ms
dB
0 2
CHANGED LINK
%kHz
ms
dB
0 3
CHANGED LINK
% 100 4
CHANGED LINK
PAGE OF
11
WAH TUBE EQ L/R OUTS
CLIP
# b
GATE
Johnson Millennium
User Guide
Section - 2 Setting Up
19