Moxa Technologies EM-1240-LX - Manual (Page 54)

EM-1240-LX User’s Manual UC Finder
6-5
ATTENTION
UC finder is designed solely to find IP addresses of networked Universal Communicators. It
cannot be used to configure Universal Communicators over the network. If you need to
configure UC’s IP address or other parameters, connect to UC’s console utility by Telnet (over
the network) or serial console (using the serial console cable that came with the product).
The next time you need to run UC Finder, double click the UC Finder icon located on your PC’s
desktop to launch this utility.
Linux UC Finder
To use the Linux ucfinder utility, copy ucfinder from the CD-ROM to your Linux PC, and then
use the following command to start ucfinder. The ucfinder utility will automatically broadcast a
message over your LAN network to find the IP addresses of all UC’s connected to the LAN.
#./ucfinder