Meade Instruments LX200 - Manual (Page 37)

Meade Instruments Corporation - Meade LX200 Instruction Manuals
Meade Instruments Corporation
Telescopes · Binoculars · Microscopes
Meade LX200 Instruction Manuals
7" Maksutov-Cassegrain Telescope 8", 10", and 12" Schmidt-Cassegrain Telescopes
G. MODE FUNCTIONS
IMPORTANT NOTICE! Never
use a telescope or spotting
scope to look at the Sun!
Observing the Sun, even for
the shortest fraction of a
second, will cause irreversible damage
to your eye as well as physical damage
to the telescope or spotting scope itself.
To view the separate modes within the LX200 system, press the
MODE button located between the ENTER and GO TO keys at the
top of the hand controller. Simple entry and editing of information in
the different modes contained within the system, will customize the
operation of your LX200 to perform virtually any of your observing
requirements. Better still, all of the critical information such as time,
location, alignment type, and many other functions are kept in
memory...even with the LX200 turned off!
The type of alignment, the objects that you see, the location that you observe from, the tracking speeds of
the drives, all of the clock and timing functions, the position information, and even the brightness level of
the backlit Keypad are defined by the information that you give and/ or the commands that you edit,
through five different modes of the LX200 computerized hand controller.
Once you have selected the desired mode, you can then select the individual file within the mode by
pressing the PREV or NEXT key (up and down arrow key) in the bottom right hand portion of the hand
controller, moving the LCD arrow up or down beside the file description. Although you will only be able to
see two menu selections at a time in the Keypad Display, you will see more as you continue to press the
PREV and NEXT keys.
When the desired file is chosen, press the ENTER key to view the file's menu. To choose an individual
menu, again use the PREV or NEXT key to run the LCD arrow up or down the file's menu. To explore a
menu selection, again press the ENTER key. In some modes there will be options for a file's menu
selection, in others you will only enter data.
At any time that you wish to return to main file heading in a particular mode, just press MODE and it will
behave as an exit key.
[ toc ] 1. Mode One: TELESCOPE/ OBJECT LIBRARY
This is the mode that the LX200 will default to after the instrument completes its self-check, when the
LX200 is first turned on. The TELESCOPE/OBJECT LIBRARY mode can be thought of as command
central. It is here that we can select the way that we want the LX200 to perform mechanically, and where
we can explore and select from its extensive library of stored objects.
To explore either the TELESCOPE menu file or the OBJECT LIBRARY menu file, move the LCD arrow to
the appropriate selection by using the PREV or the NEXT key and press the ENTER key.
[ toc ] a. TELESCOPE Menu File
Below are the eleven menu selections of the TELESCOPE menu file illustrating the individual menu files
and file options.
[ toc ] 1) SITE
The SITE menu option allows you to enter up to four of your favorite viewing locations in longitude and
http://www.meade.com/manuals/lx200/g.html (1 of 16) [7/29/2002 7:28:04 AM]
go to Home