Meade Instruments LX200 - Manual (Page 61)

Meade Instruments Corporation - Meade LX200 Instruction Manuals
Thread one of these knobs (or screws, as appropriate) partially into the hole on the underside of the drive
base, located at the curved-end of the drive base. See 4, Fig. 12. This knob or screw should be threaded in
about 3 full turns, not fully threaded into the hole.
http://www.meade.com/manuals/lx200/apxa.html (6 of 14) [7/29/2002 7:28:13 AM]