Motorola UNIVERSAL BLUETOOTH H9 - Manual (Page 3)

4
TEST AND USE
Your phone and headset are now paired and
ready to make and receive calls.
To make a call:
Place the headset in your ear. The eartip
should be inserted so that the headset feels
comfortable and forms a seal in the ear.
Note: See “Eartips and Your Headset” on the reverse
side of this guide for more information on using eartips
with your headset.
On the phone, dial the number you want to
call and press SEND key on your phone.
If your phone and headset are successfully
paired, you will hear ringing on the headset.
After you have successfully paired your
phone and headset, you don't need to
repeat these steps. For daily use, ensure
that your headset is turned ON and that
your phone's Bluetooth feature is ON.
1
2
3
USING YOUR
PORTABLE CHARGER
BASE
The portable charger base provided with your
headset can be used to cordlessly recharge
your headset anywhere. Once charged, the
portable charger base provides power
on-the-go, extending your talk time by
constantly “topping off” your headset’s battery.
Using the included Motorola power supply, you
can charge both the portable charger base and
headset at the same time. The portable base
charger provides two indicator lights for
charging status. See “Indicator Lights” in the
reverse side of this guide for information on
these indicator lights.
Note: Using your PC’s USB port as a power source for
charging is not recommended.
USING YOUR H9
See
Features and
Functions Guide
on the reverse side
for information on
using your H9
My headset will not enter pairing mode.
Make sure that any devices previously paired with
the headset are turned off. If the indicator light is
not steadily lit in blue, turn off both the other
device and headset, wait 10 seconds, then turn
headset back on. Wait for the indicator light to
become steadily lit in blue, indicating the headset
is now in pairing mode.
My phone doesn't find my headset.
Make sure the indicator light on your headset is
on (lit in blue) and steady when your phone is
searching for devices (see step 3).
My headset worked before but now it's not
working.
Make sure your phone is on and the Bluetooth
feature is turned on in your phone (see step 2). If
the Bluetooth feature was turned off or was
turned on only temporarily, you may need to
restart the Bluetooth feature (see step 2) and pair
your phone and headset again (see step 3).
Support.
If you need more help, contact us at
1-877-MOTOBLU or visit us at
www.hellomoto.com/Bluetoothsupport
TROUBLESHOOTING