Miele W 1612 - Manual (Page 19)

Final spin cycle speed
Program RPM
Normal 1200
Wrinkle Free 1200
Delicates 600
Woolens 1200
Express 1200
Colours 1200
Dress Shirts 600
Denim/Jeans 900
Darks 1200
Drain/Spin 1200
You can reduce the final spin cycle
speed. Exception: In the Normal
program, the final spin cycle speed can
only be reduced to 1000 RPM or above.
It is not possible to select a higher final
spin cycle speed than indicated above.
Rinse cycle spins
The laundry is spun after the main wash
and between the rinse cycles. If you
reduce the final spin cycle speed, the
rinse cycle spin speed is reduced
along with it.
De-select final spin (Rinse hold)
^ Use the Spin speed button to select
the Rinse hold feature. After the last
rinse cycle, the laundry remains in
the water. This helps reduce creasing
if the laundry cannot be immediately
removed from the drum upon
program completion.
– Start the final spin:
The washer automatically offers you
the highest possible spin speed.
However, you can select a lower
speed (RPM). Use the Start/Stop
button to start the final spin.
– End the program:
Press the Door button. The water is
pumped away. Next, press the Door
button again to open the loading
door.
De-select the rinse spin(s) and final
spin (none
u)
^ Use the Spin speed button to select
the none
u feature. After the last
rinse cycle, the water is pumped
away and wrinkle protection is
activated. If this setting is used in the
Wrinkle free,, Express or Colours
programs, an extra rinse cycle will be
added.
Spin cycles
19