Levelling the machine 47, Screw out and adjust the feet 47, Installation and connection – Miele W 1612 User Manual

Page 47: Levelling the machine

Advertising
background image

Levelling the machine

To ensure safe and proper operation,
the washer must stand perfectly level
on all four feet.

Improper footing may increase water
and power consumption, and may
cause the washer to wander across the
floor.

Screw out and adjust the feet

Use the four adjustable feet to level the
washer. The washer is delivered with all
four feet in the shortest (screwed in)
position.

^ Use the combination wrench

provided to turn the counternut 2
counterclockwise. Then turn the
counter nut 2 together with the foot 1
to unscrew.

^ Use a level to check that the washer

is standing square.

^ Hold the foot 1 securely with a pipe

wrench. Now use the combination
wrench to screw the counternut 2
firmly back up against the housing.

,

All four counternuts must be

tightened firmly up against the
housing. Be sure to also check this
on the feet that did not require
levelling. Otherwise, the washer may
wander about.

Installation and connection

47

Advertising