Maytag G32026PExx - Manual (Page 8)

Installation
7
To Remove:
1. At the right end, flex the handle base away from
the surface of the freezer drawer. Simultaneously
slide the door handle removal card that came with
your refrigerator under the right side base of the
handle. Slide the card to the line indication or until
it stops.
2. With both hands, firmly grasp the handle towards
the right base.
3. Slide towards the left, lift and remove from the
surface.
Handle Removal
Euro Handles
This handle style is installed at the factory
Materials Needed:
• 3 ⁄
32
” allen wrench
To Remove:
• Remove set screw from
handle mounting post using
3 ⁄
32
” allen wrench.
• Repeat the procedure on all
posts to remove the handle.
To Replace:
• Align handle with the
mounting posts.
• Fully tighten all set screws to secure handle
in place.
To avoid electrical shock which can cause severe
personal injury or death, DO NOT attempt to
remove the hinged seal from the fresh food
section.
WARNING
To avoid possible product damage, ALWAYS verify
that the hinged seal is folded against the edge of
the door prior to closing.
CAUTION
Opening and Closing Your
Fresh Food Doors
(select models)
Your new refrigerator is uniquely designed with two
fresh food doors. Either door can be opened or closed
independently of one another.
There is a vertically-hinged section on the left fresh
food door. When the left door is closed, the hinged
section automatically forms a seal between the two
doors when both doors are closed.
Hinged
Seal
When the left door is opened, the hinged seal
automatically folds inward so that it is out of the way.
Contact a qualified engineer to perform this task.
WARNING
How to Connect the Water
Supply
(select models)
Ice Maker Operation
• To turn ice maker On push arm down from locked
position.
• Lift arm up and lock into position to turn ice maker
Off.