Siemens A50 - Manual (Page 38)

37
8/13/02 k45dm-ger.fm A50 Stingray, en, A31008-H5110-A1-1-7619
Surf & fun
Setup
Preparation of the phone for Internet
access depends on the service pro-
vider currently used:
• If the settings have already been
made by your service provider you
may begin immediately.
• If access profiles have already
been assigned by your service
provider select a profile and acti-
vate it (p. 38).
• The access profile must be set
and activated manually.
If necessary, check with your service
provider for details.
Profiles
You can set or change up to 5 access
profiles (may be barred by your serv-
ice provider). The entries and func-
tions may vary depending on your
service provider. You can change a
profile each time before accessing
the Internet (p. 38).
Profile settings
To create a new profile proceed as
follows:
§Menu§ Î Surf & fun Î Internet
Î Profiles
N
Select a profile.
§Change§ The entry card is
displayed.
N Make your entries field
by field.
You may get further information on
the entries from your service
provider.
§Save§ The settings are stored
and the profile list is
shown.
* depending on service provider, enter
2nd IP address and 2nd port if nec.
Profile name Name the profile or change it.
WAP
Parameters
IP address: *
Enter IP address.
Port: *
Enter port number.
Homepage:
Enter homepage (p. 35) if not
set by the service provider.
Linger time:
Enter time in seconds after
which a connection should be
terminated if no input or data
transfer takes place.
CSD settings Dial-up no.:
Enter ISP number.
Call type:
Select ISDN or Analogue.
Login name:
Enter login name.
Password:
Enter password (shown as a
series of asterisks).
~