C300z specifications, C300z.specifications – MACKIE C300z User Manual

Page 10

Advertising
background image

10

C300z.SPECIFICATIONS

System Specifications

Frequency Response (–3 dB)

55 Hz – 18 kHz

Frequency Range (–10 dB)

5 Hz – 0 kHz

Maximum SPL Long-term @ 1m 1 dB

Low-Frequency Crossover Type

 dB/octave, time offset corrected

High-Frequency Crossover Type

 dB/octave

Crossover Frequency

1800 Hz

Audio

Input Type:

Speakon®-style NL jack

1/-inch TS phone jack

Input Impedance

8 ohms

Power Handling

rms:

00 watts

music:

500 watts

peak:

750 watts

Operating Temperature Range

–10ºC to 5ºC

(1ºF to 11ºF)

Transducer Specifications

Low-Frequency Transducer

Diameter

1 in/00 mm

Voice Coil Diameter

.0 in/75 mm

Sensitivity (1W@1m) 98 dB

Nominal Impedance

8 ohms

Power Handling

00 watts

Frequency Range

50 Hz – 000 Hz

High-Frequency Driver and Horn

Diaphragm Diameter 1.75 in/.5 mm

Exit Throat Diameter 1 in/.5 mm

Diaphragm Material

Titanium

Sensitivity (1W@1m) 10 dB

Nominal Impedance

8 ohms

Power Handling

150 watts

Frequency Range

1000 Hz – 0000 Hz

Horn Type

Composite: Exponential and Conical

Mouth Size

1 in/05 mm W x 7 in/178 mm H

Horizontal Coverage

90º ±10º (1 kHz – 0 kHz)

Vertical Coverage

5º ±10º (.8 kHz – 0 kHz)

Safety Features

Over-Excursion Protection

Second-Order High-Pass Filter

Driver Protection

Dynamic protection for compression driver

Construction Features

Basic Design

Asymmetrical Trapezoidal

Enclosure Alignment

Sixth-Order

Material

Polypropylene

Finish

Grey, textured finish

Handles

One on each side, one on top

Mounting Methods

Integrated mounting points, M10

Two located on each side, top,

bottom, and rear of enclosure

Grille

Perforated metal with weather-

resistant coating

Physical Properties

Height

 in/0 mm

Width

15. in/90 mm

Depth

1.8 in/7 mm

Weight

 lbs/19.5 kg

Options

PA-A1 forged shoulder eyebolt hardware

(M10 x 1.5 mm x 0 mm)

Disclaimer

Since we are always striving to make our products better

by incorporating new and improved materials, components,
and manufacturing methods, we reserve the right to change
these specifications at any time without notice.

“Mackie” and the “Running Man” figure are regis-

tered trademarks of LOUD Technologies Inc.

All other brand names mentioned are trademarks or

registered trademarks of their respective holders, and are
hereby acknowledged.
©00-008 LOUD Technologies Inc.
All Rights Reserved.

Advertising