MACKIE C300z - Manual (Page 4)


Mixer or
Preamplifier
Right
Line level
Output
Left
Line level
Output
INPUT THRU PARALLEL
MAXIMUM NUMBER OF SPEAKERS IN PARALLEL IS 2 PER POWERED MIXER OR AMPLIFIED CHANNEL
WIDE DISPERSION EVERYBODY HEARS THE SAME THING
RMS • 300 WATTS MUSIC • 500 WATTS PEAK • 750 WATTS
SPECIFICATIONS: POWER HANDLING:
IMPEDANCE • 8 OHMS HORN DISPERSION • 90 ° X 40°
DO NOT SUSPEND FROM HANDLES. CONSULT USERS MANUAL FOR PROPER USE OF BUILT IN SUSPENSION HARDWARE.
POWERED MIXER
SERIAL NUMBER MANUFACTURING DATE
PROLONGED EXPOSURE TO HIGH SOUND PRESSURE LEVELS MAY LEAD TO PERMANENT HEARING DAMAGE. PLEASE USE CARE WHEN SETTING MAXIMUM LOUDNESS.
DESIGNED BY MACKOIDS IN WHITINSVILLE, MA AND WOODINVILLE, WA, USA • COPYRIGHT ©2003 THE FOLLOWING ARE TRADEMARKS OR REGISTERED TRADEMARKS OF LOUD TECHNOLOGIES.: "MACKIE", AND THE "RUNNING MAN" FIGURE • PATENT PENDING
INPUT THRU PARALLEL
MAXIMUM NUMBER OF SPEAKERS IN PARALLEL IS 2 PER POWERED MIXER OR AMPLIFIED CHANNEL
WIDE DISPERSION EVERYBODY HEARS THE SAME THING
RMS • 300 WATTS MUSIC • 500 WATTS PEAK • 750 WATTS
SPECIFICATIONS: POWER HANDLING:
IMPEDANCE • 8 OHMS HORN DISPERSION • 90 ° X 40°
DO NOT SUSPEND FROM HANDLES. CONSULT USERS MANUAL FOR PROPER USE OF BUILT IN SUSPENSION HARDWARE.
POWERED MIXER
SERIAL NUMBER MANUFACTURING DATE
PROLONGED EXPOSURE TO HIGH SOUND PRESSURE LEVELS MAY LEAD TO PERMANENT HEARING DAMAGE. PLEASE USE CARE WHEN SETTING MAXIMUM LOUDNESS.
DESIGNED BY MACKOIDS IN WHITINSVILLE, MA AND WOODINVILLE, WA, USA • COPYRIGHT ©2003 THE FOLLOWING ARE TRADEMARKS OR REGISTERED TRADEMARKS OF LOUD TECHNOLOGIES.: "MACKIE", AND THE "RUNNING MAN" FIGURE • PATENT PENDING
1202-VLZPRO
Stereo
Power Amplifier
C300z C300z
HOOKUP.DIAGRAMS
. Turn on your mixing console (or other signal
source).
. Turn on the amplifier. Turn up its volume or
gain control(s) as recommended by the manu-
facturer.
5. Start the signal source, whether it be speak-
ing into a microphone or starting a CD player.
Adjust the volume controls on the mixer (or
other signal source) for normal operation.
Quick.Start
Make all initial connections
with the power switches OFF
on all equipment. Make sure
all master volume, level, or gain
controls are all the way down.
1. Connect the line-level outputs from your
mixing console (or other signal source) to the
inputs of your power amplifier.
. Connect the “Speaker Output” from your power
amplifier (or powered mixer) to one of the
INPUT
connectors on the C00z, either the 1/"
TS jack or the NL Speakon™-style connector.
C300z: WITH A MIXER AnD POWER AMPLIFIER
MAXIMUM NUMBER OF SPEAKERS IN PARALLEL IS
2 PER POWERED MIXER OR AMPLIFIED CHANNEL
POWERED MIXER
C300z: WITH A POWERED MIXER, AnD uSIng THE THRu jACk