Multiple exposure – Minolta 800si User Manual

Page 42

Advertising
background image

MULTIPLE EXPOSURE

81

FLASH BRACKETING

80

Press the drive-mode button
in the control panel.

Turn either control dial until
the multiple exposure
indicator

appears in the

data panel.

Press the adjust button in the
control panel.

•

will start blinking.

The multiple-exposure mode lets you overlap up to 9 images on
the same frame.

Repeat steps 3 and 4 until the series is complete.

• Flash bracketing is equivalent to fill-flash mode.
• Do not turn off or remove the accessory flash before the series is

complete. The remaining shots will be exposed at the flash sync speed,
causing the pictures to be underexposed.

• Flash bracketing will not operate with an accessory flash that is

connected to the camera's PC terminal or the Vertical Control Grip VC-
700's PC terminal via a sync cord (the VC-700 is sold separately).

✎

To cancel the flash bracketing series before it is complete, push the
built-in flash down or turn the camera off.

• The data panel and viewfinder will change to

indicate the frame number in the bracketing series.

Continued on next page.

2152EE 17/10/97 10:57 AM Page 80

Advertising