Minolta 800si User Manual

Page 43

Advertising
background image

83

MULTIPLE EXPOSURE

82

CANCELLING MULTIPLE EXPOSURE

Cancel multiple-exposure mode by setting another drive mode.

✎

It is also possible to change the number of exposures remaining in the
multiple-exposure series after starting the series. Follow the
instructions for Setting Multiple Exposure. The number of exposures
set will be the number remaining.
Example A: After starting a multiple exposure series, the number of
exposures is changed to 1. Multiple exposure mode will cancel after
the next exposure is made.
Example B: After shooting 8 exposures of a multiple exposure series,
the number of exposures is reset to 9. Multiple exposure mode will
cancel after 9 more exposures are made.
• Values 0 - 9 are available.

Turn either dial to select the
number of exposures.

Press the shutter-release button partway down to enter
the setting.

Press the shutter-release button all the
way down to take the first picture.

• M2 will appear in the data panel.

Repeat step 6 until all the exposures have been made.

• Multiple-exposure mode is cancelled and the camera is automatically

set to single frame advance after all the exposures have been made.

• If the battery is removed before a multiple exposure series is

complete, multiple exposure will be cancelled, but the film will not
have advanced to the next frame.

• Tell your photofinisher there are multiple exposure frames on the film.

Some photofinishers may not automatically print multiple exposure
frames.

✎

You may want to use exposure compensation to underexpose each
exposure so the final image on the frame is not overexposed (p 74).

2152EE 17/10/97 10:57 AM Page 82

Advertising