Leveling legs, Oven light, Storage drawer – Maytag 8113P645-60 User Manual

Page 9: Oven bottom, Removal of gas appliance, Electrical connection, Caution

Advertising
background image

8

Leveling Legs

ANTI-TIP BRACKET

LEVELING LEG

LEVELING LEG

CAUTION

Be sure the anti-tip bracket secures one of the rear
leveling legs to the floor. This bracket prevents the range
from accidentally tipping.

Be sure the range should be leveled when
installed. If the range is not level, turn the
leveling legs (located at each corner of the
range) until range is level.

ANTI-TIP BRACKET

To Replace Oven Light Bulb:

1. When oven is cool, hold bulb cover in place, then slide wire

retainer off cover. Important Bulb cover will fall if not held
in place while removing wire
retainer.

2. Remove bulb cover and

light bulb.

3. Replace with a 40-watt

appliance bulb.

4. Replace bulb cover and

secure with wire retainer.

5. Reconnect power to range. Reset clock.

Oven Light

CAUTION

• Disconnect power to range before replacing light bulb.

• Use a dry potholder to prevent possible harm to hands

when replacing bulb.

• Be sure bulb is cool before touching bulb.
Do not touch hot bulb with a damp cloth as this may cause

the bulb to break.

BULB COVER

WIRE

RETAINER

Storage Drawer

(select models)

The storage drawer can be removed to allow you to clean
under the range.

To remove:

1. Empty drawer and pull out to the first stop position.

2. Lift up the front of the drawer.

3. Pull out to the second stop position.

4. Grasp sides and lift drawer up and out.

To replace:

1. Fit the ends of the drawer glides into the rails in the range.

2. Lift up the front of the drawer and gently push in to the

first stop position.

3. Lift drawer up again and push until drawer is closed.

Oven Bottom

Protect oven bottom against spillovers, especially acidic or
sugary spills, as they may discolor the porcelain enamel. Use
the correct pan size to avoid spillovers and boilovers.

Removal of Gas Appliance

Gas appliance connectors used to connect this appliance to
the gas supply are not designed for continuous movement.
Once installed, DO NOT repeatedly move this gas appliance
for cleaning or to relocate. If this appliance has to be moved
and/or removed for servicing, follow the procedure described
in the installation instructions. For information, contact
Maytag Customer Assistance at 1-800-688-9900 USA or
1-800-688-2002 Canada.

To prevent range from accidentally tipping, range must be
secured to the floor by sliding rear leveling leg into the anti-
tip bracket.

CAUTION

Do not store plastic, paper products, food or flammable
materials in this drawer. The drawer may become too warm
for these items when the oven is in use.

Electrical Connection

Appliances which require electrical
power are equipped with a three-
prong grounding plug
which must be
plugged directly into a properly grounded
three-hole 120 volt electrical outlet.

Always disconnect power to appliance before servicing.

The three-prong grounding plug offers protection against
shock hazards. DO NOT CUT OR REMOVE THE THIRD
GROUNDING PRONG FROM THE POWER CORD PLUG.

If an ungrounded, two-hole or other type electrical outlet is
encountered, it is the personal responsibility of the
appliance owner to have the outlet replaced with a
properly grounded three-hole electrical outlet.

Advertising