Motorola 6881012B23-D - Manual (Page 10)

10
BATTERY INFORMATION
Your BRAVO PLUS pager is designed to operate with a
single AA-size alkaline battery.
Installing/Replacing the Battery
• Locate the ribbed lock on the bottom of the pager. Slide
the lock toward the back cover to expose the red marking.
• While pressing on the recess of the battery door, slide
the door in the direction of the arrow until it pops up from
the housing.
• Align the battery so the polarity markings (+ and -) match
the markings on the back cover. Insert the battery.
• Align the semicircle on the battery door with the semicircle
on the bottom of the pager near the word “LOCK”. Press
down on the end of the door nearest the battery and slide
the battery door until it is completely closed.
• After the cover is closed, slide the lock toward the front
of the pager to conceal the red marking.
Low-Battery Indicator
When the battery nears the end of its life, the standby
screen is replaced with
lo cell . The battery must be re-
placed within a few days to avoid interruption of pager op-
eration.
DIAGRAM
LOCK
BATTERY DOOR
(+)
(–)
81012B23.FR4 Page 10 Tuesday, September 26, 1995 19:40