iRiver H120 - Manual (Page 28)

52 53
No Power
No sound is heard from the
player or distortion is heard
during playback.
Characters in LCD are
corrupted.
Poor FM Reception.
Failed download of a file to
the player
H120 will not charge properly
Check whether the battery is discharged.
Check the operation after connecting AC
Adapter.
Check whether VOLUME is set to “0”.
Connect the remote control / earphone
plug firmly.
Check whether the plug is dirty (clean
the plug with a dry and soft cloth).
Corrupted Audio file may have a noise or
sound cut off.
Check out Menu General Language
and confirm whether the right language
has been selected.(Refer to page 40)
Adjust the position of the player and
earphones.
Turn off the power of other electronic
devices near the player.
The headphone cord functions as the
antenna, they must be plugged in for
best reception.
Check the connection between your
computer and the player to ensure that
the cable is secure.
Check the condition of the battery.
Check the operation after connecting AC
Adapter.
Check whether the adapter plug is
properly connected.
Fully charged batteries will not accept
charge, the player will appear not to
enter charge mode.
Should any problem persist after you have checked these symptoms,
consult your iRiver dealer or contact support at iRiver.com.
Remote Control Headphones and foam covers
User Manual/Warranty card AC Adapter
Installation CD Line in / out Connection
Cable
Earphone Extension Cable USB Cable
Carrying Case
Accessories subject to change without notice and may vary from image shown.
External Microphone