Intel LV19C Series - Manual (Page 36)

Disassembly
Removing the Optical Device Assembly 2 - 17
2.Disassembly
Removing the Optical Device Assembly
1. Remove the rear component cover ( page 2 - 7 ) USB port and module cover ( page 2 - 11 ) and LCD back cover
( page 2 - 15 ).
2. Remove screws - , and disconnect connector , from the optical device.
3. Remove the optical device
, and remove the screws ( - ) in order to separate the optical device from the
bracket .
4. Reverse the removal procedures to intall the new optical device.
Figure 2 - 12
Optical Device
Assembly
Removal
Sequence
a. Remove the screws
and disconnect the
cable.
b. Remove the Optical
Device.
c. Remove the screws
and separate the
bracket from the op-
tical device.
1 4 5
6 7 10
11
a.
1 2
3
6
4
8 c.
b.
7
9 10
11
11

5. Optical Device
11. Brackets
• 8 Screws