Insignia IS-SP102371 - Manual (Page 6)

4
IS-SP102371 Speaker System
www.insignia-products.com
Connecting the speakers
To connect your speakers:
1 Attach your speakers to the optional bases. For information on attaching
them to the optional stands, see “Attaching the speaker stands” on
page 5. For information on attaching the front center speaker to the
optional desktop base, see “Attaching the desktop base” on page 6.
2 Connect the speakers by matching the colors of the jacks and speaker
wires.
3 Connect the supplied speaker wire to the FR, FL, FC, RC, SR, and SL
terminal jacks. Push and hold the speaker terminal tab down to insert the
wire, then release the tab to lock the wire in the terminal. Make sure that
the insulation is completely removed from the ends of the speaker wires
at all connection points.
Important: To avoid short-circuiting (and damaging) the speakers, make sure that
the stripped end of each speaker wire does not touch another speaker terminal or
the stripped end of another speaker wire.
Front speaker left
Center speaker
rear
Surround
speaker right
Front speaker
right
Center speaker
front
Surround
speaker left
IS-SP102371.fm Page 4 Friday, July 29, 2005 5:23 PM