Insignia IS-SP102371 - Manual (Page 7)

5
IS-SP102371 Speaker System
www.insignia-products.com
Attaching the speaker stands
Important! Prepare your speaker stand components before assembling them. The speaker
stands should only be used for the FR, FL, SR, SL, and RC speakers.
To attach the speaker stands:
1 Place the stand base on a flat, hard, and stable surface.
2 Assemble the stand by following the numbered sequence shown in
Figure A.
3 Tighten the joint connectors and get the stand ready (Figure B).
4 Slide the speaker over the housing bracket, then turn the screw clockwise
to tighten it (Figure C). You can attach the speakers in vertical (Figure D)
or horizontal (Figure E) orientation.
5 Hide the speaker wire in the stand as shown in Figure F.
1
2
3
4
5
6
7
8
A F E D C B
IS-SP102371.fm Page 5 Friday, July 29, 2005 5:23 PM