Setting up your boombox, Using the ac power adapter, Installing the batteries – Insignia NS-B3112 User Manual

Page 11

Advertising
background image

11

Insignia NS-B3112 Boombox with iPod® Dock

www.insignia-products.com

Setting up your boombox

Using the AC power adapter

To use the AC power adapter:
1
Make sure that your local AC power source matches the voltage

shown on the plate located on the AC power adapter. If it does not,
consult your dealer or service center.

2 Insert the small connector at the end of the AC power adapter

cable into the DC IN jack on the back of your boombox.

3 Plug the AC power adapter into a wall power outlet.

Installing the batteries

To install the batteries:
1
Turn your boombox over, then open and remove the door to the

battery compartment.

2 Insert eight (8) “C” size batteries into the battery compartment.

Make sure that you match the + and – symbols on the batteries
with the + and – symbols in the battery compartment.

Caution

To protect your boombox during thunderstorms, unplug the
AC power adapter from the AC power outlet.

Note

Only use the supplied AC power adapter, which has the
following specifications: DC=12V 2A
Unplug both the DC plug and the adapter when not in use.
The batteries are automatically bypassed when the AC
power adapter is used.

Advertising