ioSafe R4 - Manual (Page 110)

P/N: 900-10004-00 REV 02 USER GUIDE, IOSAFE R4 110
Input Field Format
Domain/Workgroup Name
A valid domain or workgroup name must conform to the following restrictions:
ƒ Name must consist only of characters a-z, A-Z, 0-9, and the symbols _ (underscore), –
(dash), and . (period).
ƒ Name must start with a letter.
ƒ Name length must be 15 characters or less.
Host
A valid IP address or a host name.
Host Name
A valid host name must conform to the following restrictions:
ƒ Name must consist only of characters a-z, A-Z, 0-9, and the symbols – (dash) and .
(period).
ƒ Name must start with a letter.
ƒ A short host name length must be 15 characters or less.
ƒ A fully-qualified domain name (FQDN) must have no more than 63 characters in each
section separated by . (period), and cannot end with a – (dash). Example of a valid FQDN:
firstpart.secondpart.thirdpart.com.
ioSafe R4 Host Name
A valid host name except the first part or short host name must be 15 characters or less due to
NetBIOS name length restriction.
Appendix B