Insignia Simulated Rock Outdoor Speakers NS-R2111 - Manual (Page 4)

4
Insignia NS-R2111 Outdoor Rock Speakers
www.insignia-products.com
4 Run the wire through the trench to the
amplifier.
5 Connect the speaker wire to the terminals on
the back of your amplifier.
Make sure that the polarity of the speaker
wires are connect correctly.
• amplifier + (positive, red) to speaker red
wire (positive)
• amplifier - (negative, black) to speaker
black wire (negative)
6 Turn your amplifier on and test the system
with your favorite music. If the speakers are
operating properly, refill the wire trench.
Specifications
Copyright
© 2007 Insignia. Insignia and the Insignia logo are
trademarks of Best Buy Enterprise Services, Inc. Other
brands and product names are trademarks or registered
trademarks of their respective holders. Specifications and
features are subject to change without notice or obligation.
For service and support call (877) 467-4289.
Speaker type Weather-resistant rock speaker
Tweeter 1-inch (25.4 mm) coaxial tweeter with
poly-ether imide (pei) diaphragm
Woofer 6.5-inch (165 mm) driver with
polypropylene cone and rubber
surround
Impedance 8 ohm
Sensitivity 90 dB
Frequency response 70 Hz - 20 kHz
Power recommendation 5 - 100 Watt
Dimension (W×H×D) 13.0 Ч 9.65 Ч 7.7 inches
(330 Ч 245 Ч 195 mm)
Weight 8.6 lbs (3.9 kg)