Invacare Variance Plus - Manual (Page 22)

20 21
Be careful not to pinch your fingers when removing, replacing, swinging away
or adjusting any armrest.
Swingaway full length, removable armrest
- The full length armrest is comprised of tube supporting front locking and long
armpad.
- No adjustment on this armrest.
Swingaway, adjustable height, removable armrests (Photo 9)
- Adjustable height armrests are comprised of tube supporting front locking,
adjustment system of the armpad.
- Adjustment : loosen knob A and press pin-spring B, adjust the selected
height and retighten knob. Knob A can be replaced with screw (supplied) for
users who do not change the arm-support height often.
8.2 Folding frame
8.2.1 Side-frames
Side-frames structures have hole for fixed rear and front wheels.
No adjustment on side-frames.
8.2.2 Folding system
Folding system comprises of two cross-bars and allows the wheelchair to be
folded into the closed position. In order to fold or unfold your wheelchair, refer
to page 11.
No adjustment on the folding system.
8.3 Rear wheels
8.3.1 Wheels
- The rear wheels with a diameter of 24’’ x 1.3 /8’’ (600 mm x 32 mm) or 22’’ x 1.3/8’’
(550 mm x 32 mm) can be fitted with pneumatic or solid tyre. The rims are spoked for
24’’ and 22’’ or plastic for 24’’.
For the 24’’ spoked wheels, a protector can
be fitted over the spokes in order to protect
one’s finger.
- Adjustment :
Only the pneumatic tyre may require
pressure verification. The pressure is shown
on the sidewall of the tyre and the tyre must
never be over inflated.
�
��