Invacare Variance Plus - Manual (Page 21)

18 19
8.1.2 Different types of seat
Standard seat (Photo 5)
- Your wheelchair is equiped with a standard seat
with vinyl or nylon upholstery.
- No adjustment on this seat.
Check that fixation screw A is located correctly,
preventing the user to be injured.
Toilet seat (Photo 6)
- Use : A qualified medical or paramedic personnel will be able to advise on the
most appropriate way of using toilet seat.
- No adjustment on the toilet seat.
This toilet seat must be removed to fold the
wheelchair.
- Removal : Pull in the way to remove toilet seat
support A from chassis.
To put the toilet seat in use-position, reverse the
operation, checking carefully that supports A are in
place and that there is no play between toilet seat
and chassis.
8.1.3 Different types of armrests
All armrests can be removed from the frame and
may be folded back. (photos 7 and 8)
- Use : push the pin-spring A and raise the armrest
and rotate rearwards. In order to put it back in
position on the wheelchair, put the tube in the front
frame support.
The pin B should be in the 'out' position.
To remove armrest, push the pin A and raise the
armrest slightly, then pull the lever C and remove
the armrest from frame support D.
To replace the armrest on the wheelchair, introduce
the rear entry cone of armrest first in the rear frame support and put the front
tube in the front frame support.
Pins B and E should be in the 'out' position.,
checking carefully that pins are in place and that
there is no play.
Swingaway desk, removable armrest
- The desk armrest is comprised of tube with a
bend on the front supporting front locking and short
armpad.
- No adjustment on this armrest.
Warning : Do not lift up the chair by the armrests.
�
�
�
�
�
�
�
�
�
�
�
�