English step 3: install expansion cards, Step 4: install i/o peripherals cables, Step 4-1: i/o back panel introduction – GIGABYTE 8S661FXMP-RZ User Manual

Page 12

Advertising
background image

- 12 -

8S661FXMP-RZ Motherboard

English

Step 3: Install expansion cards

1. Read the related expansion card's instruction document before installing the expansion card into

the computer.

2. Please make sure your AGP card is AGP 4X/8X (1.5V).

3. Please carefully pull out the small white drawable bar at the end of the AGP slot when you try to

install/ Uninstall the AGP card. Please align the AGP card to the onboard AGP slot and press firmly
down on the slot .Make sure your AGP card is locked by the small white- drawable bar.

AGP Card

Step 4: Install I/O Peripherals Cables

Step 4-1: I/O Back Panel Introduction

PS/2 Keyboard and PS/2 Mouse Connector

To install a PS/2 port keyboard and mouse, plug the mouse to the upper port (green) and the keyboard
to the lower port (purple).

Parallel Port

The parallel port allows connection of a printer, scanner and other peripheral devices.

Serial Port

Devices like mouses, modems, and etc. can be connected to Serial port.

VGA Port

Monitor can be connected to VGA port.

USB port

Before you connect your device(s) into USB connector(s), please make sure your device(s) such
as USB keyboard, mouse, scanner, zip, speaker...etc. have a standard USB interface. Also make
sure your OS supports USB controller. If your OS does not support USB controller, please con-
tact OS vendor for possible patch or driver upgrade. For more information please contact your
OS or device(s) vendors.

Advertising