English, 2 advanced bios features, Hard disk boot priority – Intel GA-945P-DS3/S3 User Manual

Page 34: First / second / third boot device, Password check

Advertising
background image

GA-945P-DS3/S3 Motherboard

- 34 -

English

2-2

Advanced BIOS Features

Hard Disk Boot Priority

Select boot sequence for onboard(or add-on cards) SCSI, RAID, etc.

Use < > or < > to select a device, then press<+> to move it up, or <-> to move it down the list.
Press <ESC> to exit this menu.

First / Second / Third Boot Device

Floppy

Select your boot device priority by Floppy.

LS120

Select your boot device priority by LS120.

Hard Disk

Select your boot device priority by Hard Disk.

CDROM

Select your boot device priority by CDROM.

ZIP

Select your boot device priority by ZIP.

USB-FDD

Select your boot device priority by USB-FDD.

USB-ZIP

Select your boot device priority by USB-ZIP.

USB-CDROM

Select your boot device priority by USB-CDROM.

USB-HDD

Select your boot device priority by USB-HDD.

LAN

Select your boot device priority by LAN.

Disabled

Disable this function.

Password Check

Setup

The system will boot but will not access to Setup page if the correct
password is not entered at the prompt. (Default value)

System

The system will not boot and will not access to Setup page if the correct
password is not entered at the prompt.

If you want to cancel the setting of password, please just press ENTER to make [SETUP] empty.

CMOS Setup Utility-Copyright (C) 1984-2007 Award Software

Advanced BIOS Features

` Hard Disk Boot Priority

[Press Enter]

First Boot Device

[Floppy]

Second Boot Device

[Hard Disk]

Third Boot Device

[CDROM]

Password Check

[Setup]

HDD S.M.A.R.T. Capability

[Disabled]

CPU Hyper-Threading

(Note)

[Enabled]

Limit CPUID Max. to 3

(Note)

[Disabled]

No-Execute Memory Protect

(Note)

[Enabled]

CPU Enhanced Halt (C1E)

(Note)

[Enabled]

CPU Thermal Monitor 2(TM2)

(Note)

[Enabled]

CPU EIST Function

(Note)

[Enabled]

Virtualization Technology

(Note)

[Enabled]

Full Screen LOGO Show

[Enabled]

KLJI: Move

Enter: Select

+/-/PU/PD: Value

F10: Save

ESC: Exit

F1: General Help

F5: Previous Values

F6: Fail-Safe Defaults

F7: Optimized Defaults

Item Help
Menu Level`

Select Hard Disk Boot
Device Priority

(Note) This item will show up when you install a processor which supports this function.

Advertising