Intermec 6110 - Manual (Page 27)

SECTION 2 Operation
6110 Hand-Held Computer User’s Guide 2-3
Installing the Main Battery
" NOTE: Your computer is shipped with uncharged batteries for safety rea-
sons. Refer to Figure 2-1 to show how to install the battery pack in
your computer. Charge your computer for 14 hours before using it
the first time. This will ensure that both the main and backup batter-
ies are fully charged.
1. With the gold battery pack contacts facing into the
battery compartment place the curved portion of the
pack in the bottom of the compartment.
2. Press down on the battery pack until it snaps into
place. As you press down on the battery pack you
should hear three clicks before the pack is completely
seated into place.
" NOTE: After the initial charging of 14 hours, the normal charge time for the
main battery pack is 2-1/2 hours.
Figure 2-1
Installing Main Battery Pack
1
1
2
3