ICP DAS USA DB25 - Manual (Page 18)

DeviceNet to PLCs or Devices
12
C
ONFIGURING
P
ORT
#2 (PLC
S
O
R
D
EVICES
)
When the highlight bar is around the “Port 2 (PLCs/Devices)” sub-heading, press the ENTER key. This
opens a window which allows you to select the type of PLCs or devices connected to this port and check
all of the communication settings.
PORT # 2
PLC
Configuration
Window
PLC/Device Protocol
The window for PORT # 2 Configuration will open with the highlighted bar at the “PLC/DEVICE
PROTOCOL” selection heading. If the displayed Protocol is not the one wanted, simply press the
ENTER key and a smaller window will appear.
PLC/Device
Protocol
Selection
Window