Sirius satellite radio operation – iSimple IPOD PXAMG User Manual
Page 13
11
Changing Bands
Press and hold the “
I◄ SEEK” button until a beep is heard.
Store Presets
Tune to the desired station. Press the “►” icon on the screen to enter the Preset
menu. Turn the rotary
TUNE KNOB to select the preset location (1-18) where you
wish to store the preset. Once the preset location is displayed (for example PRE1)
press “
I◄ SEEK” to store the preset into memory. The screen will display “PR
SAVED” and your preset has been stored into memory.
Recall Presets
Press the “►” icon on the screen to enter the Preset menu. Turn the rotary
TUNE
KNOB until the desired station is displayed. Press the “►I” button to recall the preset.
Exit menus
Press the
“◄” icon to exit the preset menu and continue playing the current
station. “EXIT” will be displayed when button is pressed. You can also wait the
allotted 10 seconds and the menu will exit automatically.
Steering Wheel Controls
Press the “▲” button to advance to cycle up through presets.
Press the “▼” button to return to cycle down through presets.
Press the “►I” button to seek up to the next available station.
13. Sirius Satellite Radio Operation
Entering Mode Select Menu
Press the “XM” icon on the navigation screen. Immediately turn the rotary
TUNE
KNOB in the top right hand corner to scroll through available sources. Once
“SIRIUS” is displayed, press the
“►” icon on the screen to select the displayed
mode.
Channel Up
Turn the rotary
TUNE KNOB clockwise to move up through the channels.
Channel Down
Turn the rotary
TUNE KNOB counter-clockwise to move down through the channels.
Category Selection
Press the “
Browse” icon then press the icon that corresponds with the Category you
wish to select.
Store Presets
Press and hold the preset button on which you want to store the channel.
Please Note: If you are using the Media GateWay to add Sirius but
still have factory XM installed, it is important to keep the presets in
seperate banks.
Recall Presets
Press the preset button that corresponds with the channel you want to recall.