Non-navigation radios 6. ipod operation – iSimple IPOD PXAMG User Manual

Page 7

Advertising
background image

5

9. Plug in the male connectors on the PGHGM1 harness into the 16-pin port and

14-pin port on the back of the radio. Next, connect the factory 16-pin and 14-pin

harness into the female connectors on the PGHGM1 harness. Be sure to make a

firm connection but do not force it. Plug the Black micro-fit 24-pin connector on the

PGHGM1 harness into the PXAMG Media GateWay box.

10. To complete the installation secure the Media GateWay (PXAMG) and HD Radio

tuner (HDRT) or Satellite Radio tuner (SCC1) into the cavity in the dash behind

the radio. Be sure that the cables and interface modules are not near moving

parts or sharp metal edges as they may damage the cables. To prevent rattling

noises inside the dash, use zip ties, tape, or other fasteners to mount the

interfaces securely.

11. With all connections made, reconnect the vehicle’s battery, insert the key into the

ignition, and turn the vehicle on. Check for proper operation of the Media GateWay

and HD Radio tuner before reinstalling the factory dash panels.

12. Note: The first time you access the GateWay, your radio may display “DEV INIT”

while the device is initializing. If this is displayed, please wait one minute then

cycle the ignition off and on. Then access SAT mode again to begin normal

GateWay operation.

Non-Navigation Radios

6. iPod Operation

Entering Mode Select Menu

Press the “

BAND” button a few times until XM is displayed on the screen.

Immediately turn the rotary

TUNE KNOB in the top right hand corner to scroll

through available sources. Once “IPOD” is displayed, press the

“FWD>>” button

to select the displayed mode.

PLEASE NOTE: When entering the Mode Select menu for the first

time the radio will display “Busy” until the TUNE KNOB is turned.

Next Track

Turn the rotary

TUNE KNOB clockwise one notch to advance to the next track.

Previous Track

Turn the rotary

TUNE KNOB counter-clockwise one notch to move back to the previous

track.

Fast Forward

Press

“►I SEEK” to fast forward the song that is playing. Press “►I SEEK”

again to resume play.

Rewind

Press

“I◄ SEEK” to rewind the song that is playing. Press “I◄ SEEK” again to

resume play.

Entering Browse Menu / Select

Press the

“FWD>>” button to enter the browse menu or to make a selection while in

the browse menu.

Advertising
This manual is related to the following products: