Icom IC-F1710 - Manual (Page 17)

13
2
BASIC OPERATION
2
■ User set mode
User set mode is accessed with [User Set Mode] and allows
you to set seldom-changed settings. In this case you can
“customize” the transceiver operation to suit your preferences
and operating style.
Entering the user set mode:
q While pushing and holding [P1] and [P2], push [
] to turn
the power ON. Then, push and hold [P0] to enter user set
mode.
w Push [P0] several times to select the appropriate item.
Then, push [Up] or [Down] or rotate [DIAL] to set the
desired level/condition.
• Available set mode functions are Backlight, LCD Contrast,
Beep, Beep Level, SQL Level, AF Min Level, Mic Gain, Horn
and Signal Moni.
e Push [ ] again to exit set mode.
User set mode is also available via a programmable key.
Please refer to p. 7 [User Set Mode] section.
[ ]
[P0] [Up]/[Down] or [DIAL]
[P1] [P0] [P2] [ ]