Icom IC-F1710 - Manual (Page 5)

1
1
PANEL DESCRIPTION
1
I c o m I n c
y o r u t i
q e* w
e*
IC-F1710
IC-F1810
F2710
F2810
■Front panel
qAF VOLUME CONTROL KNOB
Rotate the knob to adjust the audio output level.
• Minimum audio level is pre-programmed.
wFUNCTION DISPLAY (p. 2)
Displays a variety of information, such as an operating
channel number/name, 5-tone code, DTMF numbers and
audible condition, etc.
eDIAL or UP/DOWN KEYS
• IC-F1710, F2710: DIAL
Rotate to select an operating channel, etc.
• IC-F1810, F2810: UP/DOWN Keys
Push to select an operating channel, etc.
*The desired function can be assigned by your dealer. (p. 3)
r 10-KEYPAD (IC-F1810 or IC-F2810 only)
The keypad allows you to enter digits to:
• Select memory channels, tone channels and DTMF codes
(when in the DTMF code channel selection mode)
• Set TX codes and BIIS status number
• Input text message for SDM operation
• Start up with a password
t BUSY INDICATOR
Lights green while receiving a signal, or when the squelch
is open.