IKEA FWM7 - Manual (Page 20)

5
Remove fluff and objects from the pump.
6
Make sure that the impeller of the pump
can turn. If this
does not occur, contact the service centre.
7
2
1
Clean the filter under the water tap and
put it back in the pump into the special
guides.
Make sure that you tighten correctly the
filter to prevent leakages.
8
Close the pump door.
Cleaning the water inlet filters
If the appliance takes long to fill with water
or doesn't fill, the starting button indicator
light blinks in red. Check if the water inlet fil-
ters are blocked (see chapter "What to do
if..." for more details).
Proceed as follows:
1 • Turn off the water
tap.
• Unscrew the hose
from the tap.
• Clean the filter in
the hose with a
stiff brush.
• Screw firmly the
inlet hose back
onto the tap.
2
• Unscrew the hose from the appliance.
Keep a rag nearby because some wa-
ter may flow.
• Clean the filter in the valve with a stiff
brush or with the piece of cloth.
ENGLISH 20