Installation, Electrical connection, English 25 – IKEA FWM7 User Manual

Page 25

Advertising
background image

Average annual water con-
sumption (litres)

2)

9000

1) If the pressure in your area is lower or higher, please contact your After Sales Service.

2) The data is based on the washing programme for test institutes assuming 200 cycles per a year.

Information on the electrical connection, voltage and overall power is given on the rat-

ing plate, on the inner edge of the appliance door.

Installation

Caution! Refer to the assembly

instructions, in order to proceed with

the installation.

Warning! Make sure that mains plug is

disconnected from the mains socket

during installation.
If a repair is necessary, the appliance must

be easily accessible for the engineer. Put

the appliance adjacent to a water tap and

a drain.
Water inlet

1

Connect the hose to

a tap with 3/4"

thread.

2

35°

45°

Turn the inlet hose

to the left or the

right to suit the in-

stallation. Tight the

locknut correctly to

prevent water

leaks.

Caution! Do not place the inlet hose

downwards.

The inlet hose must not be lengthened.

If it is too short and you do not wish to

move the tap, you will have to purchase a

new, longer hose specially designed for this

type of use.
Water drainage

A

If you connect the

water drain hose to

a water trap under

the sink, remove the

plastic membrane

(A). If you do not re-

move the mem-

brane, detergent

residue and clothes

fluff can cause a

blockage in the

drain hose spigot.

Caution! Make sure that the water

couplings are tight to prevent water

leakage.

The drain hose may be extended to a

maximum of 4 metres. An additional

drain hose and joining piece is available

from your local Service Centre.

Electrical connection

• The appliance must be earthed.

ENGLISH

25

Advertising