Insignia NS-BT400 - Manual (Page 7)

5
Insignia NS-BT400
www.insignia-products.com
Features
Front
# Feature Function
1 Vol– button Press to decrease the volume.
2 Vol+ button Press to increase the volume.
3 button Press to play the previous selection. Press and hold to fast
rewind the current selection.
4 button Press to play the selection, press again to pause the selection.
5 button Press to play the next selection. Press and hold to fast forward
the current selection.
6 Pairing button Press and hold for three seconds to initiate pairing mode. The
blue LED will flash three times. Release the button and the
blue and red LEDs flash alternately for 90 seconds to indicate
that the speaker is in pairing mode. If the pairing process
cannot be completed within 90 seconds, the blue and red LED
stops flashing and the Bluetooth function is automatically
terminated. To disconnect the Bluetooth audio device from the
speaker system, press and hold the button for three seconds
to disconnect. This lets you disconnect the Bluetooth signal.
7 Pairing LED A blue and red LED that flashes alternately for 90 seconds to
indicate that the speaker is connecting and when the speaker
is in pairing mode. The blue LED will flash constantly when the
speaker system is connected to an audio source through
Bluetooth wireless technology.
8 Power button Press to turn on the speaker, press again to turn off the
speaker.
9 Power Green LED Lights green to indicate that the power is on.
VOL– VOL+ PAIRING
INSIGNIA
1 2 3 4 5 6 7 9 8