Insignia NS-A1113 User Manual
Page 20
18
NS-A1113 DVD Executive Shelf System
www.insignia-products.com
Audio setup page
•
Digital output – When playing DOLBY or MPEG discs, the
optical or coaxial terminal outputs in SPDIF/RAW format. The
connected amplifier must be able to decode the DOLBY
DIGITAL or MPEG source. SPDIF/PCM may be selected when
the system is connected with a 2CH digital stereo amplifier.
•
HDCD – This option has two settings: 44.1K and 88.2K. Set it
according to your source disc.
•
Downmix mode –
•
LT/RT: left and right soundtrack audio output
•
Stereo: Stereo audio signal output
•
Dual mono – This option is used to set the mode of audio
output, including L-Mono, R-Mono, Mix-Mono, and Stereo.
•
Dynamic scope – This option is chosen when Line output is
selected for the compression mode. Linear compression ratio
is adjusted to acquire different compression effects. When the
option FULL is chosen, the peak-peak value of audio signals is
set at the minimum. When OFF is chosen, it is set at
maximum.