Intel 82600 User Manual
Page 22
User Guide XB1 COM Express Module
©EKF -22- ekf.com
Removing the Board
Warning
This procedure should be done only by qualified technical personnel. Disconnect the system from its
power source before doing the procedures described here. Failure to disconnect power, or
telecommunication links before you open the system or perform any procedures can result in personal
injury or equipment damage.
Typically you will perform the following steps:
C
Switch off the system, remove the AC power cord
C
Attach your antistatic wrist strap to a metallic part of the system
C
Identify the board, be sure to touch the board only at the front panel
C
Unfasten screws
C
Remove the module carefully
C
Store board in the original packaging, do not touch any components, hold the board at the
heat spreader only
Warning
Do not expose the card to fire. Battery cells and other components could explode
and cause personal injury.